DC Motor Control GUI with Cpp/CLI

Control DC Motor by using Cpp/CLI GUI and Arduino

Github Repo:

phamr39/DCMotorControlGui-Cpp-CLI-

Setup:

This program was developed on Visual Studio 2019 Community.
In C++/CLR case, it's running on.NET4, you may need to install the related tool on Visual Studio.
Visual Studio 2019: https://visualstudio.microsoft.com/
Arduino IDE: https://www.arduino.cc/en/Main/Software
To get the C++/CLR Windows Forms, visit here: https://marketplace.visualstudio.com/items?itemName=RichardKaiser.CppWinformsVS2019VSIX001

Arduino and Circuit:

Prepare Hardware:

• Arduino Uno R3
• 12V DC Motor
• 12V-2A Adapter

Circuit:

You need to connect follow the below:

• Encoder C1 pin (if available) - 2
• Encoder C2 pin (if available) - 3
• Driver Chanel 1 - 9
• Driver Chanel 2 - 10

Don't forget to connect the ground

USAGE and DEV:

• Clone this repo and go to MotorControlCLI folder, open MotorControl.sln with Visual Studio Click Local Windows Debugger to run this GUI. (It may has a quite different from your Visual Studio version)
• Connect the Arduino. In default, the Arduino open the Serial Port with 38400, you must choose this Baudrate on the GUI
• To get the COM port, Go to Device Manager -> Port(COM & LPT). You will see something like Arduino Uno (COM5)

Feel free to report the issues, I will fix it as soon as possible :)